Page cover image

โ”FAQs

Discover answers to the most frequently asked questions from Blitz users.

Deposits & Withdrawals

If you're depositing into Blitz and / or withdrawing for the first time, please refer to the responses and associated tutorial sections linked below.

Deposits

Why do I need to deposit?

Traders must deposit collateral into the Blitz smart contracts to allow users to take on leverage within the system. The smart contracts are audited and non-custodial, meaning you can withdraw your available funds at any point.


Do I control my assets?

Yes. Only you can trade and access your funds. The smart contracts are non-custodial, which means you are in control of your assets.


How do I deposit from other chains or use unsupported tokens?

Blitzโ€™s integration of Axelar allows you to deposit directly into Blitz from 8+ different blockchains in a single transaction. You can also swap unsupported assets on the current chain into tokens that Blitz supports.


How do I deposit from a centralized exchange (CEX) into Blitz?

Youโ€™ll first need to send supported assets from the CEX to your DeFi wallet connected to the Blast L2 mainnet.

Once you receive your assets in your wallet, return to the [Deposit] dialogue to deposit directly from your wallet into Blitz.


Withdrawals

  • There is NO bridging involved with withdrawals.

  • You can enable the borrowing toggle to borrow assets against your margin.

  • All successfully placed withdrawals will be processed in batches with other withdrawals. You can monitor your withdrawal status in the [Withdrawals History] tab of the Portfolio Page.

  • Blitz minimizes user fees by settling transactions in batches on-chain to Blast when gas fees are low. All actions on Blitz still happen instantaneously, but withdrawals can take up to 30 minutes or longer during high gas periods.

  • The 30-minute time-frame is the targeted maximum that a withdrawal will remain pending, as Blitz usually sends the transaction to Blast after this time automatically -- even during high gas periods.

  • If your withdrawal takes longer, it may be due to persistent and excessively high gas costs.

NOTE: If your withdrawal appears on the Blitz app, that means it was successfully placed and will settle on-chain once gas costs come down or if gas is already below the target threshold at the time of your withdrawal.

Please note that withdrawal times may still be variable as the automated mechanism continues to be optimized to account for dynamic changes in gas costs.


General FAQ

What is unified cross-margin trading, and how does that make Blitz unique?

Cross-margin trading is a type of margin system whereby traders can utilize multiple forms of collateral and margin is shared across positions.

Every asset and liability will have an impact on your margin. This form of portfolio margining lets you make the most of your assets while offsetting liabilities.

  • Assets: Deposits, Positive PnL, Pools, and Spreads

  • Liabilities: Perp Positions, Negative PnL, and Borrows

Unified Cross-Margin -- Docs Section


How do I earn interest on deposits?

Interest is automatically earned on deposited assets on Blitz.

Money markets are integrated into the protocol to facilitate leveraged spot trading and borrowing. All deposits automatically participate in the underlying money market.

The trustless smart contracts ensure that borrowers always maintain margin requirements.


What are the fees?

Blitz charges low trading fees for executing a filled trade order based on the notional size of the position.

  • Maker Fees = 0% for ALL markets

  • Taker Fees = 0.02% for ALL markets

Maker fees are applied to orders that add liquidity to the orderbook, such as limit orders that donโ€™t immediately cross the book.

Taker fees are applied to orders that do immediately cross the book, such as market orders.

Learn more about fees on Blitz.


Are there take-profit (TP) and stop-loss (SL) orders?

Yes, traders can set TP / SL orders for open perpetual positions on Blitz.

Learn more about TP/SL order types.


Why do I have less funds available than what I deposited?

โ€œI deposited $50, why does it say I only have $40 to trade with?โ€

Your Funds Available represents the value of your collateral weighted by the initial margin weights of the deposited asset.

Since Blitz utilizes a cross-margin risk engine, this means you can use different types of collateral as margin. Because certain types of collateral are more volatile than others, a discounted weight is applied to determine the impact of collateral on your Funds Available.

That said, USDB is 1:1 with face value.


Is there a minimum amount to trade?

There is no minimum deposit amount or minimum $ value per trade.

There is a minimum order size per market, known as MinSize. That is, the minimum amount you must buy or sell for that market denominated in the asset - i.e. โ€˜ETHโ€™ or โ€˜ETH-PERPโ€™.

Trades that donโ€™t meet the minimum order size will not be valid and the Blitz app will prompt you to adjust.

To learn about the minimum order size for each market:


Why is there a negative sign in front of my asset balance?

A negative sign (-) in front of an assetโ€™s balance means you are currently borrowing that asset.


I didn't borrow USDB. Why is my balance negative?

This could happen because you have perpetual positions with negative PnL and non-USDB assets as collateral.

The protocol automatically settles PnL (USDB) between losing and winning positions throughout the duration of holding a position. If you have a perpetual position with negative PnL, but you donโ€™t have any USDB, the protocol will borrow USDB on your behalf to settle the PnL.

This results in a negative USDB balance. The same will happen if you close the negative PnL position entirely.


How do I repay borrows?

Click on the [Repay] button:

  • In the Balances Table -- click on the drop-down (right-most side).

  • In the Navbar - click on your wallet address (top-right side).

You have 2 options when it comes to Repaying:

  • Deposit the amount youโ€™re borrowing to settle the borrowed balance.

  • Convert (sell) another balance to settle the borrowed balance. For example, sell wETH for USDB to repay a USDB borrow.


Why was my position liquidated if the chart shows that the price didn't hit my Liq. Price?

The Liq. Price displayed in the Perp Positions table is an Estimated Liq. Price based on your current account and the positionโ€™s health.

If you have multiple positions open, the Liq. Price is subject to the health changes of your other positions.

Perpetuals are liquidated based on the given market's Oracle Price -- provided by the Stork Oracle.

The Oracle Price is submitted to smart contracts based on time intervals or price movements. When an account gets liquidated, it is because the Oracle Price caused the account to fall under maintenance margin requirements.


How do liquidations work?

An account is eligible for liquidation once either of the following has occurred:

  • Funds Until Liq = $0

  • Liq. Risk = 100%

The riskiest positions / balances will get liquidated first, until the account is no longer eligible for liquidation.


What is Margin Usage?

Margin Usage is the percentage of your initial margin being used by open positions. In other words, itโ€™s how much of your tradable collateral is in use.

If Margin Usage reaches 100%, you cannot initiate new positions.


What is Funds Available?

The amount of tradable funds / collateral you have in your account. This is the initial weighted margin you have unused.

If your Funds Available reaches $0, you cannot initiate new positions.

This can also be known as Free Collateral or Available Margin.


What is Funds Until Liq?

The amount of funds / collateral in your account until liquidation. If it reaches $0, your account will be at risk of liquidation.

You must maintain a Funds Until Liq. above $0 to avoid being liquidated.


What is Liq. Risk?

The percentage of your maintenance margin that is being used by positions.

  • Also known as Maintenance Margin Usage.

  • If it reaches 100%, youโ€™re at risk of liquidation.

Low Risk = 0 โ†’ 40%

Medium Risk = 40 โ†’ 60%

High Risk = 70 โ†’ 90%

Extreme Risk = 90 โ†’ 100%

Health Bar Monitors

What are initial and maintenance weights?

For an exchange that only accepts dollar-pegged collateral, collateral is typically weighted at face value.

In a cross-margin system that accepts multiple forms of collateral, weights are used to discount collaterals that are more volatile. Most trading venues will use 2 weights:

  1. Initial

  2. Maintenance

Initial Weight: Used to determine the amount of collateral an account has to initiate positions - i.e. for trading.

Maintenance Weight: Used to determine the margin to maintain positions - i.e., to avoid liquidation.


Initial vs. Maintenance Margin

Initial and maintenance weighted margins give traders an idea of their accountโ€™s health through two metrics:

  1. The account's ability to trade.

  2. How close the account is to liquidation.

Initial Margin

The amount of funds your account has to trade with. This is the sum of your initial weighted collateral minus initial weighted margin requirements.

Maintenance Margin

The amount of funds your account must maintain before it will be liquidated. This is the sum of your maintenance weighted collateral minus maintenance weighted margin requirements.


For any other questions or feedback, please refer to the Official Blitz Discord for assistance.

Official Blitz Discord: https://discord.com/invite/blitzexchange

Last updated